Skip to Content
Important Notice ahead of OBOS Mandatory Pre-Proposal Meeting December 18, 2024 READ MORE
Important Notice ahead of OBOS Mandatory Pre-Proposal Meeting December 18, 2024 READ MORE

How to Install a Transponder

INSTALLATION INSTRUCTIONS

SunPass Mini

Many SunPass customers prefer the SunPass Mini, even though it no longer works after it is removed from the traveler's windshield.

Installation Steps:

  1. Choose location for SunPass Mini from the picture shown below
  2. Clean the preferred SunPass Mini mounting location
  3. Peel off backing (make sure to remove all the air bubbles from under your Mini or it may not work as designed)
  4. Apply

SunPass PRO

The SunPass PRO is now easier than ever to install on the inside of your vehicle's windshield due to the attached suction cups.

Installation Steps:

  1. Choose location for SunPass PRO from the picture below
  2. Clean the preferred SunPass PRO mounting location
  3. Press your SunPass PRO against the windshield to enable the suction cups to stick. Transponder must be placed a minimum of 2 inches below the windshield frame. If the windshield has a solar strip, install the transponder at least 2 inches below the strip.
  4. Each suction cup has a “tab” that can be lifted to facilitate the removal of your SunPass PRO.
subscribe

Top Button